SKYBOX F3 HD PVR
F3 Skybox HD PVR is a very cool product output from the skybox dvr family. Ability no doubt, is very suitable for those who like a high-resolution picture quality Full HD 1080p, along with LAN port for connection to the Internet and connect to the server ccam, USB port to play back the recording impressions and PVR to record your favorite broadcasts when you can not watch it at the time, and you just activate the PVR and play it back when you come home from work.
SKYBOX F3 HD PVR receiver General Specifications:
- Dual CPU, 396 MHz MIPS Processor
- Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1
- Fully compliant MPEG-2 MP@HL & MP@ML
- Fully compliant MPEG-1 Layer I & II & III, Dolby Digital Audio(AC3)
- SCPC & MCPC receivable from C/Ku band satellites
- Multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/(USALS) supported)
- NIT search supported
- Support MPEG-5
- Support HDMI 1.3
- Support PVR (store in USB disk)
- Multimedia files playback (by USB)
- Support Electronic Program Guide (EPG) for 7 days
- Teletext and subtitle out through OSD
- Support multi-lingual DVB subtitle and teletext
- Automatic and manual channel scan options
- Automatic service scan
- Channel-change time < 1 second - OSD in many languages and skin-support - Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable LED Display - Multiple display mode: 1080p/1080i/720p/570p/576i/480p - MPEG-2 / H.264 Hardware decoding - Videotext Decoder - Analog audio output: stereo(L+R) - Screen format: auto, 4:3, and 16:9 - Upgrade software through USB 2.0 port - Powerful program management function, parent lock - CA 1x slot - 10/100Mbit Ethernet Interface - Directly bouquet-lists
Additional:
● Support 16 bit DDRII 800 SDRAM● Support serial flash with different size
● Support Smart card interfaces
● MPEG-2 MP@HL video decoder
● AVC/H.264 HP@L4.1 video decoder
● MPEG4 ASP supported
● JPEG decoding accelerator
● Support 4 Video VDAC, can output YPbPr and CVBS simultaneously
● Build-in DVI and HDMI with HDCP
● Support full HD output
● MPEG-1 layers I, II and PCM down-mixing
● IEC958 S/PDIF digital output
● Digital mute control and volume adjustment
● Support Dolby down-mixed 2 channel and Dolby Prologic2
● Support 2 channel HE-AAC V1
● Build-in 2 channel Audio DAC
● Embedded High performance 32bit CPU
● Debug unit with EJTAG interface
● USB 2.0 host interface
● 2 sets of UART Interfaces
● SDIO Interface
● OTP supported
● LQFP 256 Package
Accessories Included:
1 x F3 unit1 x AC Three Pin UK
1 x HDMI cable
1 x Remote control
1 x User Manual
Block Diagram Board F3:
Technical Data:
DVB-S2
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz
Input Level:-65~-25dBm
Input Impedance:75¦¸
LNB Power: Auto/14v/18v/OFF, Imax = 500mA
Video Decoder
Video Compression MPEG-2 and MPEG-1 compatible, H.246Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio Decoder
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Video Parameter
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
Serial Interface RS 232
Type RS232 bidirectionalBit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet
10/100 MBit compatible interfaceUSB
1 x USB 2.0 Host , for upgrading of firmware and for recording using the PVR functionLNB power and polarisation per tuner
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTIONDiSEqC - Rotor Control
Physical specification
Ambient Temperature +15 °C...+35 °CHumidity < 80% Size (W x D x H): 300 mm x 220 mm x 56 mm Weight: 1,8 kg without HDD
Power
AC input range:100-240VAC 50/60Hz with Three pin UK plugPower Consumption (Standby): Max. 10W (<1 W)
eso sirve para poner camaras
ReplyDelete